Featuring Semi-Solid lithium-ion cells, our new portable power solution is one of the smallest and lightest
2008Wh* power solution currently on the market. The
new internal chemistry ensures absolute safety, reliability
and faster charge times. Equipped with 3x 240V 50/60Hz
AC Outputs ensuring Pure Sine Wave output, this allows
the GUARDIAN to be used in a vast array of scenarios
without the fear of incompatibility or failure.
All encased in a small form factor and weighing less than 17kg,
allows it to be transported and stored easily without
issue.
IDX ensures all the cells installed into each unit are of the
highest quality and are suitable. In addition, each unit
goes through rigorous quality assurance and are cleared
for UKCA and CE regulations.
A semi-solid battery is one in which some or all of the electrolyte inside is solid. The semi-solid battery that IDX has adopted this time is called a “liquid-added (impregnated) semi-solid battery,” and uses a composite electrolyte in which a small amount of liquid electrolyte is impregnated into a solid electrolyte.
This achieves both high safety and ionic conductivity. In addition, the impedance inside a semi-solid battery is 1/10 of that of conventional batteries, and the internal ions can move between spaces with fewer barriers (impedance), so no extra energy is needed, and the amount of heat generated is significantly reduced.
Furthermore, the inverter used inside the product uses GaN semiconductors. Compared to silicon semiconductors, it is more efficient and faster, and the power conversion efficiency is improved, which leads to smaller and lighter products.
- Approximately 50% lighter and smaller than other companies’ models with the same capacity
- Achieves a large capacity of 2008Wh and a large output of 2000W while still being small enough to fit easily on a work table, magliner, or other equipment.
- The cells used in the SSP-2000 have passed the nail insertion test (internal short circuit test)
- The electrolyte used inside is non-flammable and flame-retardant, so it will not generate heat or catch fire even if it is subjected to external impact, overcharging, or an internal short circuit.
- Cycle life is over 1000 times
- The combination of semi-solid battery and GaN semiconductor reduces heat compared to conventional products, slows down cell deterioration, and achieves a longer lifespan
- Approximately 60% less noise than models of the same capacity
- Nearly 0dB noise when operating at less than 1000W
- Heat generation is reduced, resulting in less fan operation and quieter operation
・Quick charge up to 60-80% in about 1 hour (full charge takes about 2 hours)
・Built-in cell preheating system makes it resistant to cold environments and can be charged from -30℃
Great when in remote locations with the ability to switch to battery power in 20ms~
LEARN MORE →Flexibility to power a myriad of equipment at the same time from cameras to DIT stations
LEARN MORE →Great when in remote locations with the ability to switch to battery power in 20ms~
LEARN MORE →Flexibility to power a myriad of equipment at the same time from cameras to DIT stations
LEARN MORE →
For product orders, please contact our official distributors and resellers.
If you are unsure, please contact us for details and we will introduce you to an agency.
◎ USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
Inquiries regarding new products, individual consultations, appointments, demo unit requests, etc.